1 – 25 of 25 Classroom Resources

• 

  pH, Chemical Change, Chemical Change, Reaction Rate | High School

  Lesson Plan: Cheesy Science Emergency Lesson Mark as Favorite (3 Favorites)

  In this lesson, students will learn about pH, acids, bases, enzymes, and chemical reactions through reading the highly rated ChemMatters article, Cheesy Science. The lesson includes several activities to help promote literacy in the science classroom related to the reading. This lesson could be easily used as an emergency lesson plan for a substitute teacher, as most of the activities are self-guided.

• 

  Redox Reaction, Oxidation, Reduction, Half Reactions, Reaction Rate, Reaction Rate | High School

  Lab: Stop The Science: Redox Regulation Mark as Favorite (16 Favorites)

  In this lab, students will investigate oxidation-reduction reactions while creating a complex picture using reactions of copper solutions on aluminum foil. Students will also apply previous knowledge of reaction rate to adjust concentrations, allowing for artistic expression such as shadowing and layering in their artwork.

• 

  Combustion, Chemical Change, Balancing Equations, Reaction Rate, Conservation of Mass, Conservation of Matter, Stoichiometry, Limiting Reactant, Chemical Change, Conservation of Matter, Conservation of Mass, Graphing, Error Analysis, Accuracy, Observations, Inferences, Interdisciplinary, Reaction Rate, Catalysts, Measurements, Mole Concept | High School

  Lesson Plan: Clean Air Chemistry Mark as Favorite (19 Favorites)

  In this lesson, students will learn about air pollution and some steps toward mitigating it. First, they will burn a candle and measure its mass and the concentration of CO2 over time. Students will discuss which data set they have more confidence in and why and then use stoichiometry to predict outcomes. Next, students explore incomplete combustion in a model-based worksheet that shows how a lack of O2 in the burning of fuels can produce air pollution. Students work together to interpret the models, define terms, and draw conclusions. Lastly, students work in groups using Lego models to illustrate how a catalytic converter works. They race “Nature” against catalysts “Palladium,” “Platinum,” and “Rhodium” to see what breaks down air pollution molecules fastest.

• 

  Reaction Rate, Concentration, Reaction Rate | High School

  Lab: How Fast Can We Remove Tough Stains? Mark as Favorite (48 Favorites)

  In this lab, students explore how temperature and concentration can affect reaction rate. Using various mixtures of OxiClean solutions, blue food coloring, and water students conduct several tests and draw conclusions based on their results.

• 

  Reaction Rate, Catalysts, Experimental Design, Chemical Change, Reaction Rate, Chemical Change | Middle School

  Lesson Plan: Investigating Fast and Slow Reaction Rates Mark as Favorite (0 Favorites)

  In this lesson, students will review the characteristics of chemical changes and then use a catalyst and an inhibitor to explore the reaction rate of the oxidation of iron.

• 

  Chemical Change, Reaction Rate, Chemical Change, Exothermic & Endothermic, Heat, Temperature | High School

  Lab: A Comparison of Two Chemical Reactions Mark as Favorite (41 Favorites)

  In this lab, students will perform two chemical reactions, one between acetic acid and sodium bicarbonate and the other between the citric acid and the sodium bicarbonate in an Alka-Seltzer tablet when dissolved in water. Both reactions will produce gas while reacting in a closed plastic sandwich bag, causing it to inflate. Students will observe the reactions and analyze the results in order to understand indicators of chemical changes, heat flow, and factors that affect reaction rates

• 

  Reaction Rate, Activation Energy, Catalysts, Reaction Rate | High School

  Lesson Plan: Kinetics Unit Plan Mark as Favorite (32 Favorites)

  The AACT high school classroom resource library and multimedia collection has everything you need to put together a unit plan for your classroom: lessons, activities, labs, projects, videos, simulations, and animations. We constructed a unit plan using AACT resources that is designed to teach the topic of kinetics to your students.

• 

  Stoichiometry, Balancing Equations, Reaction Rate, Solubility | High School

  Lab: Analyzing the Reaction between Baking Soda and Citric Acid Mark as Favorite (41 Favorites)

  In this lab, students will examine the reaction between citric acid and baking soda. They will analyze the chemical equation, balance it and calculate needed quantities of each reactant for a complete reaction. Based on their observations, students will determine if all reactants were completely used during the reaction.

• 

  Reaction Rate, Order of Reaction , Activation Energy, Catalysts, Rate Constant, Rate Determining Step, Reaction Rate | High School

  Lesson Plan: Reaction Mechanisms Mark as Favorite (37 Favorites)

  In this lesson students explore reaction mechanisms and their connection to rate laws and energy profile graphs through a game, relay race, and finally a chemical demonstration.

• 

  Reaction Rate, Reaction Rate | Middle School, High School

  Simulation: Reaction Rates Mark as Favorite (59 Favorites)

  In the May 2018 simulation, students investigate several factors that can affect the initial rate of a chemical reaction, including concentration, temperature, surface area of the reactants, and addition of a catalyst.
  

• 

  Reaction Rate, Reaction Rate | Middle School, High School

  Activity: Simulation Activity: Investigating Reaction Rates Mark as Favorite (64 Favorites)

  In this simulation, students will have the opportunity to investigate several factors that can affect the initial rate of a chemical reaction. Students will have the opportunity to manipulate several variables including concentration, temperature, or surface area of the reactants as well as the addition of a catalyst during the simulation. These reaction rates will be compared to a controlled reaction. Students will interpret a simplified qualitative representation of the reaction as well as analyze corresponding data organized on a graph.

• 

  Solubility Rules, Chemical Change, Redox Reaction, Precipitate, Reaction Rate, Reduction, Oxidation | High School

  Lesson Plan: Removing Copper Stains from Masonry Mark as Favorite (9 Favorites)

  In this lab, students investigate the use of milk of magnesia poultice to remove copper stains on masonry in copper architecture. They use chalk as the model for masonry, copper(II) chloride solution as a model for soluble copper and a freshly prepared slurry of copper phosphate as a model for a hard stain of copper on masonry. Through a series of investigations students have the opportunity to connect chemistry topics with real-world applications, such as environmental hazards, engineering practices of copper architecture, corrosion control, and structural protection.

• 

  Chemical Change, Beer's Law, Redox Reaction, Reduction, Oxidation, Concentration, Reaction Rate | High School

  Lesson Plan: Rustbusters! A Lab Activity on Corrosion Mark as Favorite (12 Favorites)

  In this lesson students learn about factors affecting the rate of corrosion and evaluate the efficiency of different protective coatings to simulate products used in industry when building metal structures like ships or bridges.

• 

  Reaction Rate, Reaction Rate, Chemical Change | Middle School, High School

  Demonstration: Comparing Rates of Reaction Mark as Favorite (47 Favorites)

  In this demonstration, students observe the effect of temperature, concentration, and particle size on the rate of a chemical reaction.

• 

  Reaction Rate, Activation Energy, Catalysts, Combustion, Reaction Rate | High School

  Demonstration: Rates of Reactions Mark as Favorite (26 Favorites)

  In this series of demonstrations, students will be introduced to factors that affect the rates of chemical reactions. They will observe and record their observations, while also describing the rate-influencing factor for each demonstration as well as evidence supporting whether or not the reaction rate was increased or decreased by the factor.

• 

  Chemical Change, Reaction Rate, Reaction Rate, Phase Changes | Elementary School

  Demonstration: Plop & Fizz Investigation Mark as Favorite (1 Favorite)

  In the demonstration the teacher will perform a reaction between water and Alka-Seltzer in order to generate the release of carbon dioxide. Students will observe the chemical reaction, while timing the release of carbon dioxide and observe 3 states of matter. This will be repeated 3 times, each time increasing the number of tablets used.

• 

  Reaction Rate, Reaction Rate, Acid Base Reactions | Middle School, High School

  Lab: Plop, Fizz: How to Affect the Rate of a Chemical Reaction Mark as Favorite (51 Favorites)

  In this lesson, students will react Alka-Seltzer tablets with water. By varying the temperature of the water, particle size of the Alka-Seltzer, and concentration of the Alka-Seltzer they can see the effect on the rate and strength of the chemical reaction.

• 

  Solubility, Solute & Solvent, Reaction Rate | Elementary School

  Lab: M&M's Solution Mark as Favorite (2 Favorites)

  In this lab, students will investigate dissolving using M&M’s and will determine whether dissolving happens faster without assistance, or with the assistance of the tongue and teeth.

• 

  Reaction Rate, Chemical Change, Observations, Chemical Change, Reaction Rate, Catalysts | Elementary School

  Lab: To What DEGREE Does it Matter Mark as Favorite (0 Favorites)

  In this lab the students will explore how factors such as temperature may influence chemical reactions. Students will use citric acid and sodium bicarbonate (Alka-Seltzer) and a catalyst (water) to induce a reaction at varying degrees. Observations will be made of the rate at which the reactions take place under these varying conditions. The students will make predictions of how the temperature of the water will affect the chemical reaction. They will use a stop watch to time the reaction between the Alka-Seltzer and the varying temperatures of water and graph their observations for analysis, they will compare data to deduce whether temperature has any influence during a chemical reaction.

• 

  Reaction Rate, Chemical Change, Reaction Rate, Observations | Middle School, Elementary School, High School

  Demonstration: Simple Kinetics Mark as Favorite (56 Favorites)

  In this demonstration, students will see that different food dyes react with bleach at different rates.

• 

  Chemical Change, Pressure, Reaction Rate, Acid Base Reactions, Chemical Change, Conservation of Matter | Elementary School, Middle School

  Lab: Rocket Challenge Mark as Favorite (6 Favorites)

  In this lab, students will have the opportunity to construct a rocket, with the challenges of both designing it and preparing a chemical reaction for its “fuel” in order to propel the rocket over the furthest distance. Students will investigate available materials, quantities and ratios during allotted planning and testing phases. Student will record their plans, modifications and designs during the process. The lab will culminate with a competition amongst students to see whose rocket will travel the longest distance.

• 

  Solubility, Solute & Solvent, Molecular Motion, Phase Changes, Reaction Rate | Elementary School

  Lesson Plan: Particles in Motion Mark as Favorite (1 Favorite)

  In this lesson, students learn that particles that make up matter are in constant motion.

• 

  Chemical Change, Observations, Chemical Change, Reaction Rate, Interdisciplinary, Physical Change, Reaction Rate | Middle School

  Lab: Chemical Weathering in Geology Mark as Favorite (1 Favorite)

  In this lab, students will explore the differences between erosion, weathering and chemical weathering. They will complete a lab experiment that simulates chemical weathering on 4 different types of rocks. They will also learn how to use the Mohs Hardness Test to analyze the results.

• 

  Reaction Rate, Reaction Rate, Chemical Change, Acid Base Reactions | Middle School

  Lab: Bath Bomb Chemistry! Mark as Favorite (28 Favorites)

  In this lab, the students will work in cooperative groups to investigate how to make a scented, effervescent bath bomb and explore the chemistry needed to create them. Groups will test a variety of different variables in order to compare the reaction rate of each sample. Students will use the results to determine which variables are optimal for making and using bath bombs.

• 

  Le Châtelier's Principle, Establishing Equilibrium, Reversible Reactions, Reaction Rate, Equilibrium Constants, Graphing | High School

  Lab: Dynamic Equilibrium Simulation Mark as Favorite (33 Favorites)

  In this lab, students will explore equilibrium using paper clips to mimic a chemical reaction.